Bulkhead Fittings front9 rust remover as long as you do

as long as you do not run it over 100PSI

Maximum: 1-1/4" Pipe

I use it for my vehicles and have also used for customers that have light hard water stains on their windows

calcium carbonate

Bulkhead Fittings front9 rust remover as long as you doSafely plumb your Kingslinger to your tank using our quality Bulkhead Fittings. First, remove the locknuts from the fitting body and measure the exterior diameter. Cut a hole that size through the wall of your tank. Attach the locknuts to compress the gaskets and make a leak proof seal. (If only one locknut, nut goes on interior of tank.) Hand tighten the locknuts until tight, then tighten with a wrench for 1 4 to 1 2 turn more. Don't over tighten to